FAQ's for OREX (Certified Soluble) Products:

Question 1: What is OREX™?

Question 2: What OREX Certified Soluble™ products are currently available?

Question 3: What sizes of OREX coveralls are available?

Question 4: What about other protective clothing, such as rubber gloves and shoe covers?

Question 5: What are the benefits of OREX products?

Question 6: When will OREX clothing be worn?

Question 7: OREX looks a lot like a white paper suit. How does it compare?

Question 8: How durable are the OREX products?

Question 9: How do OREX garments perform in a wet environment? Are they waterproof?

Question 10: Are OREX products with a liquid protection barrier available?

Question 11: What Chemical protection does OREX provide?

Question 12: Can the product be manufactured in different colors?

Question 13 What about discrete radioactive particle (hot particle) pass-through properties of the OREX clothing?

Question 14: Will the OREX clothing dissolve if I am sprayed with hot water?

Question 15: What about “hot work”? Is OREX flame retardant?

Question 16: As a Radworker, what do I do with the OREX products following use?

Question 17: What if the OREX products are damaged or cut? Should I put them in the trash instead of the laundry receptacle?

Question 18 Are there any “lessons learned” regarding OREX that I should know as a radworker?

Question 19: What about used OREX mops and wipes? Should they go into a trash receptacle?

Question 20: What is the purpose of the double sleeve on the OREX coveralls?

Question 21: Will tape or other non-OREX material cause a problem with processing?

Question 22: Is there any previous experience with use of the OREX products?

Question 1: What is OREX?
Answer: OREX is the trade name for a new line of products engineered specifically for the nuclear industry. OREX products are manufactured from a special, degradable polymer that is environmentally friendly. Following use, the used products are treated offsite using a proprietary process that dissolves the product in high temperature water (> 190 degrees F.), decontaminates it and ultimately chemically converts it to carbon dioxide and water, much of which is returned to the environment for reuse. Radioactivity is removed during the treatment process and is collected on filters for subsequent handling and proper disposal as radioactive waste. This process eliminates waste. This means an entire 20’ long sea-land container full of used OREX materials can be ultimately placed in a 1-gallon container. Back to top

Question 2: What OREX Certified Soluble products are currently available?
Answer: Currently, the OREX Protective Clothing line includes standard coveralls, hoods, booties, and hard hat covers. Additionally, there are splash resistant coveralls and booties, multiple dosimetry coveralls, lab coats, and scrub/modesty garments. Several consumable products are also available including ice vests, mops, OREX waste bags, wire-tie dosimetry bags, spill socks and rolls of sheeting. Several new products are always in development. Back to top

Question 3: What sizes of OREX coveralls are available?
Answer: OREX coveralls come in the following sizes: Medium, Large, X-Large, 2X-Large, 3X-Large, 4X-Large and 5X-Large. OREX coveralls tend to run larger in size than conventional cotton or poly/cotton blend garments. OREX garments are new each time they are worn whereas other garments may have been laundered a number of times prior to wearing them. Launderable garments typically shrink about 20% and this creates the size difference between OREX and traditional coveralls. For example, a size “Large” in a traditional laundered garment might be about the same size as a “Medium” OREX coverall. OREX scrubs/modesty garments come in sizes Small through 4X-Large. Back to top

Question 4: What about other protective clothing, such as rubber gloves and shoe covers?
Answer: • Some plants still use traditional gloves and shoecovers, but a lot of plants now elect to use single use gloves and shoecovers. Either way, ETI can provide products to suit your individual needs and preferences. Back to top

Question 5: What are the benefits of OREX products?
Answer: OREX clothing is most noted for its light weight and comfort. The garments are breathable and tend to reduce heat stress. A full OREX dressout (coverall, booties and hood) weighs 70% less than traditional cloth garments. Since OREX is much lighter in weight, the risk of injury associated with protective clothing handling is reduced. OREX usage is expected to provide numerous other benefits to the plant including reduced numbers of laundry shipments during outages and improved economics over current approaches. It is also interesting to note that most plants which have converted to OREX are reporting significant reductions in personnel contamination events. This is believed to be attributed to elimination of contamination events that have historically come from the residual contamination present in laundered protective clothing. Back to top

Question 6: When will OREX clothing be worn?
Answer: OREX will be used in place of conventional cotton coveralls and launderable hoods and booties. It may be also be used as an outer layer to replace paper suits in some cases. Radiation Protection personnel, plant procedures, or RWP’s will provide instructions on when, where and how to dress using the OREX products. Back to top

Question 7: OREX looks a lot like a white paper suit. How does it compare?
Answer: OREX is more “breathable” than conventional paper suits, so it tends to be much more comfortable to wear. However, standard OREX clothing was designed as a substitute for traditional cotton and poly/cotton blend fabric protective clothing. Like cloth fabrics, OREX is not intended to provide an absolute barrier to contaminants. In cases where a superior barrier is needed, such as very high contamination areas or wet work, the specially treated splash resistant OREX “Deluxe” coverall may be used as a substitute for paper or water repellent coveralls. While the splash resistant OREX coveralls offer superior barrier properties similar to other paper or splash resistant products, it still breathes significantly better than those products. Plant specifics and experience will determine the best applications for OREX. Back to top

Question 8: How durable are the OREX products?
Answer: Although the OREX products are extremely lightweight, they are very durable. OREX clothing has been used at many nuclear stations for all sorts of activities including scaffolding installation, steam generator platform work, reactor head disassembly/reassembly, refuel cavity decontamination, drywell entries, shielding installation, fuel transfer canal work, etc. Very few instances of ripping or tearing have been reported. Back to top

Question 9: How do OREX garments perform in a wet environment? Are they waterproof?
Answer: The standard OREX clothing will absorb moisture in a fashion similar to a cotton garment. Standard OREX is not recommended for “wet” contamination type work. Also, during hot and humid work conditions, OREX will become sweat-soaked and will not “breathe” as well as a dry garment. Back to top

Question 10: Are OREX products with a liquid protection barrier available?
Answer: Yes, the “Deluxe” OREX coverall and booties are specially treated for water resistance. While they are not completely water proof, the Deluxe OREX products are suitable for work involving incidental exposure to water or in damp environments. The Deluxe OREX products also provide superior barrier properties for very high levels of dry contamination. Back to top

Question 11: What Chemical protection does OREX provide?
Answer: OREX is designed as a replacement for tradition cotton or cotton blend garments. OREX will provide an
equivalent level of protection when compared to these garments. Workers should consult their safety
professional for guidance for additional appropriate PPE (such as chemical aprons) for protection from
chemicals or other hazards. Back to top

Question 12: Can the product be manufactured in different colors?
Answer: Currently, most OREX products are “white” for various reasons. First, it should make field segregation and radworker training easier since most clothing today is “yellow”. Second, most dyes are not easily processed in our treatment system due to the inorganic constituents present in such dyes. So we try to avoid using dyes during manufacturing. OREX scrubs and modesty garments are made with the same fabric as our coveralls, but with a printed overlay design. This was done to create an opaque fabric for “modesty” purposes. Additionally, the Deluxe OREX Coveralls are manufactured with a yellow zipper to allow for easier identification relative to the standard OREX coveralls. Back to top

Question 13: What about discrete radioactive particle (hot particle) pass-through properties of the OREX clothing?
Answer: At first glance, OREX fabric appears to provide limited protective potential because of its “sheerness”. The interesting fact is that the actual fiber that makes up the fabric is clear! This gives the fabric a less substantial appearance when coupled with its lightweight nature. Due to light diffraction it appears to be “white”. There is no standard test method to determine particulate pass-through properties in a quantitative manner truly representative of field conditions. However both lab testing and actual field experience in contaminated areas indicates that OREX fabric is at least as good, if not a better barrier than an industry standard cotton or poly/cotton blend garment. Additionally, the fabric is static free and thus will not attract charged “fuel-type” particulates or Radon-222 daughter products. Back to top

Question 14: Will the OREX clothing dissolve if I am sprayed with hot water?
Answer: During processing, OREX only begins to breakdown and dissolve under prolonged immersion or contact with very hot water (>190?F). Incidental contact with hot water WILL NOT affect the properties or integrity of the garments. Back to top

Question 15: What about “hot work”? Is OREX flame retardant?
Answer: OREX protective clothing is rated Class I – Normal Flammability by the Consumer Product Safety Commission regulations of 16 CFR 1610-1998. This is equivalent to traditional protective clothing currently used by the industry. This means it is generally acceptable to wear under normal work situations. Remember, OREX is a suitable substitute for traditional cotton or poly/cotton blend protective apparel and can be worn in applications acceptable for traditional garments. However, like most standard cloth protective clothing, OREX is NOT “fire retardant” and specially treated fabrics or special garments should be considered instead for “hot work” in which sparks or welding is involved. Back to top

Question 16 As a Radworker, what do I do with the OREX products following use?
Answer: • Plant procedures may vary, but Orex products should be placed in designated containers at the undress area step off pads. Trash and conventional laundry items must be sorted and removed prior to Orex processing, so placing Orex in designated containers saves work on the back end. Back to top

Question 17: What if the OREX products are damaged or cut? Should I put them in the trash instead of the laundry receptacle?
Answer: Always put any OREX product in the laundry receptacles or receptacles identified for OREX use, regardless of whether it is damaged or cut? DO NOT put it in the trash receptacle because the trash is sent to a different vendor for processing. To achieve the maximum benefit of greater volume reduction associated with the OREX processing, the OREX products must always go in the laundry receptacles. Back to top

Question 18: Are there any “lessons learned” regarding OREX that I should know as a radworker?
Answer: Some plants have reported problems with the zipper slide or pull tab becoming detached from the zipper. Although the number of occurrences of this has been extremely small, OREX Technologies has implemented improvements to the zipper to preclude this from occurring. However, during the investigation of these reports, it was discovered that the problem primarily occurs during the undress sequence when some workers “rip” the front of the coveralls open versus unzipping them. Radworkers should be aware of this and ensure they undress using proper techniques. Back to top

Question 20: What is the purpose of the double sleeve on the OREX coveralls?
Answer: The double sleeve is designed to prevent use of tape or a closure device at the top of the glove. The inner sleeve is rolled down, the glove is put on over the inner sleeve, and the outer sleeve is rolled down on top of the glove cuff. This double sleeve design is very popular at many nuclear stations. Back to top

Question 21: Will tape or other non-OREX material cause a problem with processing?
Answer: Although the use of tape is discouraged, a design feature in the processing unit simply ensures that any non-OREX materials will remain in the first stage of the process. The non-OREX materials are easily removed following processing and are returned to the plant as waste for disposal. OREX coverall zippers are processed by ETI as waste. Back to top

Question 22: Is there any previous experience with use of the OREX products?
Answer:• The use of Orex has become widespread in the last 5 years. Orex has been used in over 45 nuclear plants, and has been used as the primary protective clothing for more than 10 Steam Generator Replacement outages and Reactor Head Replacement outages, and for numerous refueling and maintenance outages. The Department of Energy Savannah River and Oakridge sites also began using Orex in 2006. In the last 2 years, over 2.3 million coveralls and over 1.4 million sets of scrubs were worn by workers around the country. Feedback from Orex users has been overwhelmingly positive, and there have been very few problems encountered. Back to top